Smart!wind

The intelligent feed-in converter is directly connected to your wind plant. It then takes care of all control mechanisms.

  • Integrated graphic-display
  • Comfortable user interface (Smart!wind Explorer)
  • Integrated web server
  • Energy meter for e.g. feed-in and heat energy

Flexible und comfortable.

We developed the Smart!wind feed-in converter particularly for small wind plants with a power range of 5.5, 7.5 and 10 kW. Small hydro plants as well as combined heat and power plants offer additional possible applications. Smart!wind is currently available in three power classes: SW-5.5, SW-7.5 and SW-10.

  • Maximal load of the wind turbine doubles the nominal power
  • The feed-in converter comes with an intelligent own energy consumption management via 5 energy-outlets (4x DC, 1x AC)
  • Smart!wind has a 3-phase grid-coupling with 10kW and a built-in idle power control system
  • An automatic switch (ENS) according VDE-AR-N 5105 is integrated
  • The intelligent own energy consumption management distributes the generated energy among the outlets for highest customer benefit (e.g. feed-in, heating, water heating, battery or dump load)
  • The intelligent, highly-dispersed characteristic curve control makes for an optimal use of prevailing wind
  • The characteristic curve is freely selectable after voltage- or rotor speed control
  • Smart!wind has integrated control mechanisms for one wind energy plant
  • The PM-generator is connected directly and does not require any additional devices (braking resistor needed)
  • The feed-in converter has a wide input voltage range for PM-generators
  • The housing of the device is very compact with a terminal compartment to open separately
  • Thanks to numerous monitoring functions (e.g. rotor speed, generator or mains), Smart!wind leads the wind turbine to a safe state in case of an error
  • A switch to shut down the small wind turbine provides additional protective functions
  • The device is cooled with passive convection cooling over a wide output range
  • The grid and plant protection according to VDE AR-N 4105 is integrated

Our partners

You can also get the Smart!wind feed-in converter at our partner companies

Used all over the world.

Enterprises as well as private persons from numerous countries already trust in our feed-in converter – and thus could design their energy system in a more efficient and profitable way.

Used all over the world.

Enterprises as well as private persons from numerous countries already trust in our feed-in converter – and thus could design their energy system in a more efficient and profitable way.

Our service for you

We customize Smart!wind for every wind plant

Plant-specific programming of your Smart!wind

Both your small wind power plant and especially the location vary from customer to customer. We therefore install Smart!wind particularly for your wind plant. We do this by adjusting the device to fit your generator and programming it accordingly.

As a result of the plant-specific programming, the Smart!wind ends up being installed to perfectly fit to your energy plant and your individual needs; once installed it then develops its full potential.

Optimization of your plants operation

Depending on the location of your small wind energy plant, further optimization measures may become possible. The local mains for example might diverge from the norm. It then makes sense to slightly adjust the network parameters inside the Smart!wind.

Feel free to reach out to us! We then together take a look on which optimizations are useful in order to get the most out of your energy plant.

You have a question?

Contact us